.jpg?ts=1646647091)
Fence Post Type AA
Artikelnummer: ZP15AAB7016
Product information "Fence Post Type AA"
Technical Data:
- Lengths: from 1100 mm to 3000 mm
- with aluminum cap
- hot-dip galvanized steel (according to DIN 1461) or galvanized / powder-coated
- Colors: zinc, RAL6005 (moss green), RAL7016 (anthracite)
- Rectangular tube; 60/40/2
- with cover strip and stainless-steel screws
The optimal and stable professional post for the MAX and MORITZ double-rod mesh panels.
The Fence Post Type AA corresponds to Fence Post Type A but is equipped with a high-quality aluminum cap.
The AA post features a continuous cover strip that conceals the joint of the fence panels. In addition, the sturdy post dampens noise, as the spacers prevent direct contact between the fence panel and the post. Choose between the variants hot-dip galvanized or powder-coated in the RAL colors moss green and anthracite. Special colors or effect colors are available upon request.
Processing Instructions:
The AA post, made of a rectangular tube (60/40/2 mm), includes a fastening element every 200 mm. The cover strip made of flat steel (40/4 mm) provides an elongated hole every 200 mm, including the corresponding V2A stainless-steel fence screws.
The lower fence clamp has a shorter spacing so that the clamp sits in the lower part of the mesh panel, serving as a drop protection.
The AA post in professional quality offers the highest corrosion protection through hot-dip galvanizing in a dip bath according to EN ISO 1461 and, for RAL colors, through additional powder coating. The powder-coated posts are Sendzimir galvanized. The additional plastic coating further increases the corrosion resistance for many years.
Depending on the desired mesh panel height, the post is available in heights from 1100 mm to 3000 mm including the ground section. The posts are delivered drilled, riveted, and assembled with fence clamps, and include a high-quality aluminum cap. Under the designation “Fence Post Type A,” this post is also available with a plastic cap.
The AA post can be installed either in concrete or with a suitable base plate.
The AA post features a continuous cover strip that conceals the joint of the fence panels. In addition, the sturdy post dampens noise, as the spacers prevent direct contact between the fence panel and the post. Choose between the variants hot-dip galvanized or powder-coated in the RAL colors moss green and anthracite. Special colors or effect colors are available upon request.
Processing Instructions:
The AA post, made of a rectangular tube (60/40/2 mm), includes a fastening element every 200 mm. The cover strip made of flat steel (40/4 mm) provides an elongated hole every 200 mm, including the corresponding V2A stainless-steel fence screws.
The lower fence clamp has a shorter spacing so that the clamp sits in the lower part of the mesh panel, serving as a drop protection.
The AA post in professional quality offers the highest corrosion protection through hot-dip galvanizing in a dip bath according to EN ISO 1461 and, for RAL colors, through additional powder coating. The powder-coated posts are Sendzimir galvanized. The additional plastic coating further increases the corrosion resistance for many years.
Depending on the desired mesh panel height, the post is available in heights from 1100 mm to 3000 mm including the ground section. The posts are delivered drilled, riveted, and assembled with fence clamps, and include a high-quality aluminum cap. Under the designation “Fence Post Type A,” this post is also available with a plastic cap.
The AA post can be installed either in concrete or with a suitable base plate.
Produktdetails
- Color: anthracite
- Height: 1030 mm
