.jpg?ts=1646647091)
Short Post Type KA
Artikelnummer: ZP11KA
Product information "Short Post Type KA"
The optimal and stable professional post for the MAX and MORITZ double-rod mesh panels.
The Fence Post Type KA corresponds to Fence Post Type A, but does not have a ground section and can therefore be used
in combination with base plates for fence systems that are anchored on solid surfaces such as L-stones, paving,
asphalted areas, etc.
The KA post features a continuous cover strip that conceals the joint of the fence panels. In addition, the sturdy post dampens noise, as the spacers prevent direct contact between the fence panel and the post. Choose between the variants hot-dip galvanized or powder-coated in the RAL colors moss green and anthracite. Special colors or effect colors are available upon request.
Processing Instructions:
The KA post, made of a rectangular tube (60/40/2 mm), includes a fastening element every 200 mm. The cover strip made of flat steel (40/4 mm) provides an elongated hole every 200 mm, including the corresponding V2A stainless-steel fence screws.
The lower fence clamp has a shorter spacing so that the clamp sits in the lower part of the mesh panel, serving as a drop protection.
The KA post in professional quality offers maximum corrosion protection through hot-dip galvanizing in a dip bath according to EN ISO 1461, and for the RAL colors, through additional powder coating. The powder-coated posts are Sendzimir galvanized. The additional plastic coating further increases corrosion resistance for many years.
Depending on the desired mesh panel height, the post is available without ground section in lengths from 685 mm to 2485 mm. The posts are delivered drilled, riveted, and assembled with fence clamps.
Technical Data:
The KA post features a continuous cover strip that conceals the joint of the fence panels. In addition, the sturdy post dampens noise, as the spacers prevent direct contact between the fence panel and the post. Choose between the variants hot-dip galvanized or powder-coated in the RAL colors moss green and anthracite. Special colors or effect colors are available upon request.
Processing Instructions:
The KA post, made of a rectangular tube (60/40/2 mm), includes a fastening element every 200 mm. The cover strip made of flat steel (40/4 mm) provides an elongated hole every 200 mm, including the corresponding V2A stainless-steel fence screws.
The lower fence clamp has a shorter spacing so that the clamp sits in the lower part of the mesh panel, serving as a drop protection.
The KA post in professional quality offers maximum corrosion protection through hot-dip galvanizing in a dip bath according to EN ISO 1461, and for the RAL colors, through additional powder coating. The powder-coated posts are Sendzimir galvanized. The additional plastic coating further increases corrosion resistance for many years.
Depending on the desired mesh panel height, the post is available without ground section in lengths from 685 mm to 2485 mm. The posts are delivered drilled, riveted, and assembled with fence clamps.
Technical Data:
- Lengths: from 685 mm to 2485 mm
- Hot-dip galvanized steel (according to DIN 1461) or galvanized / powder-coated
- Colors: zinc, RAL6005 (moss green), RAL7016 (anthracite)
- Rectangular tube: 60/40/2
- With cover strip and stainless-steel screws
Produktdetails
- Color: zinc
- Height: 630 mm
